[T2] Electrical problems

Avocado Tom Tarka avocadotom at gmail.com
Tue Jun 14 04:56:14 PDT 2016


Bob,

Have you cleaned up all of your grounds? Just curious...

Also: check the senders on the master cylinder. It's easy enough if you have a friend: have them step on the brakes while you check for voltage or continuity.  I've had them go bad.

What year bus is it?

Cheers,
   Tom

----
 "We are MoTown. We are professionals. We're here to get the job done."

> On Jun 11, 2016, at 10:43 PM, Bob Pratt <ka1dza at verizon.net> wrote:
> 
> Hi all.
> I've been trying to troubleshoot the new wiring for a month now. I double, triple, and quadruple checked every connection. I've found a couple of wrong connections, but there are a few problems I can't figure out.
> 
> All of the directional lights work, but when I turn on the 4 way flashers, only the front ones work. I've changed the switch. The brake lights don't work. I checked the connections on the master cylinder. The oil pressure light doesn't come on. I've changed the oil pressure switch and bulb twice.
> 
> I've tried everything I can think of. I used "Nolox" on all the connections. It's used to make better mechanical bond.
> 
> PLEASE HELP!!!!!!!!!!!
> 
> Bob Pratt
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo


More information about the type2 mailing list