[T2] redux: Porsche Pulley

[VWBrain at aol.com]

came off 356 and 912   I used one for years on the 59 panel  running a 
1904cc engine  lowered oil temps 20 degrees  later  md 
 
 
In a message dated 7/22/2013 2:08:01 A.M. Eastern Daylight Time,  
volknstein at yahoo.com writes:

Hi Chris  

I am assuming that you are speaking of a 1600 dp engine. What model  
Porsche engine did this pulley come from?

David

Sent from my  iPhone

On Jul 21, 2013, at 9:22 PM, "C. Dreike"  <c.dreike at verizon.net> wrote:

> . Ambient air temperature was  about 70F on both runs. With 
> stock pulley I saw CHT at about 365F and  still slightly rising. Today 
> with the Porsche pulley I saw a max of  about 345F. I hit 75mph before 
> I let up on the throttle.  I  think I'll keep the Porsche unit in 
> place.
> 
> BTW, the  stock belt is 905mm. I went to a 890 for the PP.
> 
>  Cheers!
> Chris
> 64 DD Kamper Kit
>  
_______________________________________________
type2 mailing  list
type2 at type2.com
https://www.type2.com/lists/type2/listinfo