[T2] Svda distributor

[Scott Busby]

You can get the timing in the ball park with a simple electrical test lamp
without starting the engine. (static timing) Turn the engine to TDC on
compression stroke of #1. (if you are not sure, open the valve cover and
check the valve clearances under #1 cylinder. At TDC of compression stroke,
both intake and exhaust will fit a 0.6mm feeler gauge underneath.) Now attach
the clip of the electrical test lamp to the coil terminal (green) which
goes to the distributor, and stick the pointy end on a decent ground. Turn
the distributor counterclockwise until the light comes on, then back
clockwise until it just goes off again.

Good luck,
Scott B