[T2] Washer hose

[Jonathan Stiles]

Michael,

The squirter nozzle is difficult to remove intact so you would be best to
do everything you can to keep it in place. I use extended needle nose
pliers to fit the hose on the driver's side.

That being said, you can use a 1/4" drive socket and extension (memory
fails me as to which size works best) and gently press or tap it out. The
socket will close the holding tabs on the nozzle.

I also put a loose piece of tape on the nozzle on the outside so it doesn't
fall and crack on the floor.

Jon


On Sun, Feb 2, 2014 at 12:56 PM, Michael Howe <dedhammike at gmail.com> wrote:

> Trying to replace old windshield washer hose.  Drivers side nozzle tough to
> get at.  How would I remove the nozzle without breaking it to reconnect the
> hose.
>