[T2] someone please take photo of coil

[c.dreike]

Jamie,
Several things about your photo worry me:
1. The engine, what I can see, is just tooo clean!
2. The wires run through a metal hole with no lining. Could rub through 
the insulation and short (FIRE!)
3. Not really a worry, Very Nice Clear picture!

Chris

On 6/3/2015 7:32 PM, Jamie wrote:
> here is a picture Bob 
> http://www.thesamba.com/vw/forum/album_page.php?pic_id=1349858
> it shows the pertronix ignition wires ..
> red with the red end on the 15 terminal
> black with the red end on the 1 terminal
>
> it shows the white wire to the ECU on the 1 terminal
>
> it shows the black power lead on the 15 terminal
> it shows the black wire that feeds the reverse lights,, and the double 
> relay.
>
> no different that what I wrote before...
>
>
> ----- Original Message -----
>> The coil
>>
>> + 15 terminal
>> black wire power to the coil ,, comes from the fan relay on ceiling 
>> of engine bay
>> black wire to reverse light fuse holder wire ... as that is power to 
>> the double relay
>>
>> - 1 terminal
>> the green points wire
>> the white wire for the ECU trigger
>>
>> 4 teminal,, is the high tension lead to the distributor cap..
>> also.. you need the ROTOR in the distributor... under the cap..
>> and you need the condensor grounded
>>
>> if you have any other wires.... let me know..
>>
>> of course.. you probably have pertronix ignition...
>> so,, instead of the green points wire to the -1 terminal,, and condensor
>> you will have a black wire there.. terminal 1
>> and the red wire to the 15 terminal
>>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>