[T2] someone please take photo of coil

[accessys at smart.net]

hmmmmmm  ok what is the brown wire??

is pouring rain and have to work thru the weekend so will print this out 
and investigate Mon, maybe take photo of what I got and let fresh eyes 
check it out.

I have that diagnostic plug but those wires were tied off years ago and 
taped up.

thanks
Bob


On Wed, 3 Jun 2015, Jamie wrote:

> Date: Wed, 3 Jun 2015 22:32:20 -0400
> From: Jamie <jrivers at globalserve.net>
> To: Jamie <jrivers at globalserve.net>, accessys at smart.net
> Cc: type2 at type2.com
> Subject: Re: [T2] someone please take photo of coil
> 
> here is a picture Bob 
> http://www.thesamba.com/vw/forum/album_page.php?pic_id=1349858
> it shows the pertronix ignition wires ..
> red with the red end on the 15 terminal
> black with the red end on the 1 terminal
>
> it shows the white wire to the ECU on the 1 terminal
>
> it shows the black power lead on the 15 terminal
> it shows the black wire that feeds the reverse lights,, and the double relay.
>
> no different that what I wrote before...
>
>
> ----- Original Message ----- 
>> The coil
>> 
>> + 15 terminal
>> black wire power to the coil ,, comes from the fan relay on ceiling of 
>> engine bay
>> black wire to reverse light fuse holder wire ... as that is power to the 
>> double relay
>> 
>> - 1 terminal
>> the green points wire
>> the white wire for the ECU trigger
>> 
>> 4 teminal,, is the high tension lead to the distributor cap..
>> also.. you need the ROTOR in the distributor... under the cap..
>> and you need the condensor grounded
>> 
>> if you have any other wires.... let me know..
>> 
>> of course.. you probably have pertronix ignition...
>> so,, instead of the green points wire to the -1 terminal,, and condensor
>> you will have a black wire there.. terminal 1
>> and the red wire to the 15 terminal
>> 
>