[T2] Running FI engine outside of the 75 van

[accessys at smart.net]

use vise grips to corner of mounting flange near where one of the upper 
engine bolts go.  keep wire clear of flywheel

Bob


On Mon, 12 Sep 2016, MUTS wrote:

> Date: Mon, 12 Sep 2016 09:59:43 -0400
> From: MUTS <muts at verizon.net>
> To: type2 at type2.com
> Subject: Re: [T2] Running FI engine outside of the 75 van
> 
> I was hooking up the 75 FI engine (which is behind the bus on its motorcycle 
> jack) so it could be run outside to check for oil leak before putting it in 
> and have a problem- what do I do about the double relay MPC that goes forward 
> (key start/ignition) and to the starter?  I can run the fuel rail separately 
> (power the pump) and hook up the ignition + on coil right to the battery and 
> then crank- is that enough?
>
> MUTS  = Michael's Ultimate Thumb Saver oboe, clarinet support
> 93 Chevy Roadtrek 210P
> 78 VW Westfalia Camper
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>