[T2] CHT probe & spark plug seal

[Erik Burtis]

Mine comes out near the top of the hole (top is up).  The rubber seal is
pliable and I've pushed it down firmly so the gap is very small I can
barely detect it by feel (dual carbs so I can't really see it well).
Hope that helps.

On Tue, Sep 13, 2016 at 4:32 PM, Avocado Tom Tarka <avocadotom at gmail.com>
wrote:

> Volks,
>
> For those of you running CHTs with spark plug (SP) probes:
>
> How do you ensure the rubber seal on the spark plug wire
> adequately/completely seals the hole in the tin for the SP?
>
> Mine seems to leave a gap with the probe wire coming out, although maybe
> they're just old wires with old rubber seals that aren't pliable enough
> anymore...
>
> Just curious...
>
> Cheers,
>      Tom
>
> ----
>  "We are MoTown. We are professionals. We're here to get the job done."
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo