[T2] Voltage regulator

[Greg Potts]

Hi Bob,

I’m not really up to speed on the type1 motors and generators, but isn’t it possible to remove the generator without pulling the motor?

Greg Potts
Field Service Engineer
ND Graphics Inc.

> On Jun 27, 2018, at 6:25 PM, Bob Pratt <ka1dza at verizon.net> wrote:
> 
> I did a "Bentley" check on the VR and found that it's only putting out 10.34 volts, or so I thought.
> I received a new VR yesterday and installed it today. The GEN light is still on and won't go out. I put a volt meter on the battery and got a reading of 12.67 volts, the same reading I got before I replaced the VR!
> I'm preparing to pull the engine, removing the generator and taking it down to the local junk yard to get it tested.
> 
> Bob
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo