[T2] Jack tie down? + dashboards

[Erik Burtis]

Kevin,
Not sure if the bracket in your '69 is the same as my '71, but here are
links to some pictures of mine.  It's only two parts, welded in bottom and
clip top.

https://zerotosixtyeventually.files.wordpress.com/2017/02/jack-clamp-2-copy.jpg
https://zerotosixtyeventually.files.wordpress.com/2017/02/jack-clamp-3-copy.jpg
https://zerotosixtyeventually.files.wordpress.com/2017/02/jack-clamp-1-copy.jpg
https://zerotosixtyeventually.files.wordpress.com/2017/02/jack-clamp-4-copy.jpg

Hope they help.
Erik
'71 westy

On Fri, Mar 23, 2018 at 12:15 PM, Kevin Guarnotta <kevin at guarnottadesign.com
> wrote:

> Hi Guys,
>
> I am trying to get the jack tie down that goes under the passenger seat of
> my '69 single cab back to original. There is part of a bracket welded down
> under the seat. Then there is a clip that sort of clisp on the top. I was
> able to fins one of these. But I think I am still missing a piece. I don't
> have a picture of this, so not sure exactly what it is I'm looking for -
> but any ideas or suggestions appreciated.
>
> By the way, I had a 2nd dashboard from another VW guy. It had been sitting
> in my basement for many years. I took it out - it was a bit rusty, but only
> has one crack, as opposed to the original one, that had numerous cracks in
> it. I sanded this down, put some master series on the rust, and am in the
> process of painting it satin black. It looks nice like this.
>
> I think semi-gloss would be too glossy, so I'm going to go with satin. I'm
> going to take the vin plate off the other dash, and put it onto this one.
>
> Thanks.
>
> -Kevin Guarnotta
>
> Guarnotta Design + Build
>   Formerly unKilo
> 138 Chestnut Ave.
> Jamaica Plain, MA 02130
>
> tel. 617 290 6573
> www.GuarnottaDesign.com<http://www.GuarnottaDesign.com>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo