[T2] Sliding door cover removal

[Chris Smith]

Yep, it's just stuck.  I Had the same problem.  It had been painted in
place at least 3 times.  It was a real pain to get off.

On Tue, Mar 23, 2021 at 1:58 PM Dave Horrigan <davehorrigan at gmail.com>
wrote:

> Hi Chris,
>
> Have you already removed the slider side? Did it come off easily? They are
> quite tight. Last time I did it I inserted a blunt blade into the covers
> and tapped them up over the beading using a mallet. Start from one end. You
> should see it start to move fairly quickly.
>
> Dave
>
> On Tue, 23 Mar 2021 at 20:13, Chris Dreike <cdreike at gmail.com> wrote:
>
> > Hi Guys,
> > I'm trying to remove the faux slider mechanism cover from the driver
> side.
> > Bentley shows how to remove the panel on the actual sliding door side.
> This
> > is the slider mechanism cover. I have removed the 3 screws holding the
> > driver side panel but the panel does not want to come off. the bead is
> > still in place. Could the panel simply be stuck to the rubber beading? Or
> > is the panel maybe slid into a slot and is stuck in there? Anyone have a
> > photo?
> > Any thoughts?
> > I'm getting ready to have th bus painted.
> >
> > Thanks guys.
> > Chris
> > 71 Sunroof
> > _______________________________________________
> > type2 mailing list
> > type2 at type2.com
> > https://www.type2.com/lists/type2/listinfo
> >
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>