[T2] Wiring help

[accessys at smart.net]

On Fri, 12 Jul 2013, Jamie wrote:

> ----- Original Message ----- From: <accessys at smart.net>
>> personally I wouldn't use the guage as a source for the tap as it IMO

> the gas gauge is only about 6v - 8v... so the vibrator regulates the voltage 
> avail at the guage at alot less than 12v,,, so adding 20 watts of load for 4 
> tiny dash lights ... that will come on when the key is on... works

I don't recall you mentioning why you need 6 taps for a couple small 
lights.

my previous owner provided a fused power wire so I have been putting 
"extras" on that fairly heavy wire.

Bob