[T2] Wiring help

[Jamie]

Bob....... you have some "extras" that may need a fairly heavy wire... but 
Sid only wants to connect some dash lights in his gauges.. .
I never said you need 6 taps for a couple small lights...  so I don't know 
why either..
I was trying to offer Sid a easy place to connect some guage lights,, so 
they turn on with his dash lights... and didn't cause heartaches disrupting 
fuse box connections [murphies law something will fall apart]
6 taps puzzle me tooooo.......  but wiring issues always bring out 
difference of opinions..  so I just offer a suggestion,, and hope it works 
for you.. YMMV as they say.!   :-)

Jamie



>> ----- Original Message ----- From: <accessys at smart.net>
>>> personally I wouldn't use the guage as a source for the tap as it IMO

> >  Jamie wrote:
>> the gas gauge is only about 6v - 8v... so the vibrator regulates the 
>> voltage avail at the guage at alot less than 12v,,, so adding 20 watts of 
>> load for 4 tiny dash lights ... that will come on when the key is on... 
>> works

>Bob Wrote I don't recall you mentioning why you need 6 taps for a couple 
>small lights.
>
> my previous owner provided a fused power wire so I have been putting 
> "extras" on that fairly heavy wire.