[T2] Spark from distributor to plug wires
accessys at smart.net accessys at smart.netWed Dec 16 13:07:00 MST 2015
- Previous message: [T2] Spark from distributor to plug wires
- Next message: [T2] Spark from distributor to plug wires
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
take an old spark plug that is known working, pull a wire from plug in engine and plug it in. sit plug on grounded surface, crank see if it fires.. or even pull a plug. what year is bus Bob On Wed, 16 Dec 2015, Max Bronsema wrote: > Date: Wed, 16 Dec 2015 09:09:35 -0800 > From: Max Bronsema <max.bronsema at gmail.com> > To: Type 2 List <type2 at type2.com> > Subject: [T2] Spark from distributor to plug wires > > Hi everyone, > > My bus has had a spate of minor equipment failures, new coil 3 months ago, > new fuel pump 3 weeks ago, and now with it driving fine for 3 weeks, last > night my wife wanting tried to put it in the garage but it wouldn't fire. I > t sounded like it wanted to go, but no luck. > > I put the battery on a charger overnight and went to bed. I took this > morning off from work so I could work with a bit of daylight and most > everything checks out, I have fuel, I have power at the coil, there is > spark from the coil, the "points" open and close, I run a pertronix > ignitor. The only thing I couldn't verify works is spark from the > distributor to the plug wires. I had the key on and was turning the engine > over by hand. > > I put a new Bosch 03010 rotor and 04-033 rotor on but still no luck. This > is a SVDA from aircooled.net. I have ran it for five years now with no > trouble. I would lean towards swapping in points, but the pertronix does > seem to be open and closing with the standard test light hooked to the + > side of the coil and grounded while you turn the engine over by hand. > > I am sure this is something simple, tonight I am having some friends over > to help push KK, my bus, into the garage so I can work on it there with a > full tune-up, but it seems really odd that it ran perfect the day before, > and now it won't start. > > Thanks for any thoughts and ideas, > > Max > "KK-Louise" '71 Westy with 1600dp, SVDA, pertronix, and alternator. > _______________________________________________ > type2 mailing list > type2 at type2.com > https://www.type2.com/lists/type2/listinfo >
- Previous message: [T2] Spark from distributor to plug wires
- Next message: [T2] Spark from distributor to plug wires
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the type2 mailing list