[T2] correction

[accessys at smart.net]

sorry  white wire on + is to fuel relay.

Bob

On Fri, 5 Jun 2015, Jamie wrote:

> Date: Fri, 5 Jun 2015 23:57:56 -0400
> From: Jamie <jrivers at globalserve.net>
> To: accessys at smart.net
> Cc: type2 at type2.com
> Subject: Re: [T2] why won't it start
> 
> Bob,,,
> the brown wire going to the plastic plug is for ground,, and appears to be 
> with a yellow wire.. and red ??
> I would assume that is a relay plug,, the brown wire for ground,, and the 
> other 2 are for the circuit.. like the fan in the engine bay ceiling.. but 
> that plug doesn't look like the fan relay plug,,, there is another plug in 
> the pic with a label I can't read.. and that appears like the fan relay 
> plug..
> guessing,,,
>
> your distributor strikes me that it is out by 90 deg....
>
> make sure all 3 brown wires under the air distributor are attached to the 
> ground.
>
> that spare black wire probably goes to the test plug .... you can check 
> continuity on it... from the wire to terminal 13 .. second row.. left hole.. 
> if you still have the test plug,
>
> my guess...
> timing is off ,,,,  90 deg
> tooo much air... vacuum leak....
>
>
> there is a black(grounded)  / white(coil +)  pair of wires coming from a 
> cable that rests on the top of the coil........ what does that power ??
>
> ----- Original Message ----- 
>> 
>> engine cranks fine
>> nice hot spark
>> injectors are firing
>> 
>> got gas.
>