[T2] why won't it start

[T2] why won't it start

Pat Spragge/RFAN Pat.Spragge at rfan.com
Tue Jun 9 19:22:55 MST 2015


Bob,
Don't want to beat a dead horse, but the when we ask if you have spark at
all 4 plugs, you respond with I have spark. Did you check for a good spark
at ALL 4 plugs?

Sent from my iPad

> On Jun 9, 2015, at 5:45 PM, accessys at smart.net wrote:
>
> 1 compression is all between 115-120psi forget which got which but all
> good
>
> 2 I have fuel spraying
>
> 3 I have spark
>
> maybe old gas, engine spun bearing in Oct so is gas from then.
>
> thanks
> Bob
>
>
>
>
> On Tue, 9 Jun 2015, thewestyman wrote:
>
> > Date: Tue, 9 Jun 2015 17:29:58 -0700
> > From: thewestyman <zolo at foxinternet.net>
> > To: accessys at smart.net, Jamie <jrivers at globalserve.net>
> > Cc: type2 at type2.com
> > Subject: Re: [T2] why won't it start
> >
> > Bob,
> >
> > 1  What are the figures you got for each cylinder compression?
> > 2  Did you check if you have fuel spraying on both sides?
> > 3  Do you have spark at all the four cylinders?
> >
> > Now, if those are good, you are close.  If not, then which one you
don't
> > have?
> > Zoltan
> >
> >
> > -----Original Message----- From: accessys at smart.net
> > Sent: Tuesday, June 09, 2015 4:07 PM
> > To: Jamie
> > Cc: type2 at type2.com
> > Subject: Re: [T2] why won't it start
> >
> >
> > actually moved em both.   both black wires but wrong terminals
> >
> > got FI working with that.
> >
> > thanks
> > Bob
> >
> >
> > On Tue, 9 Jun 2015, Jamie wrote:
> >
> >> Date: Tue, 9 Jun 2015 18:53:01 -0400
> >> From: Jamie <jrivers at globalserve.net>
> >> To: Jamie <jrivers at globalserve.net>, accessys at smart.net
> >> Cc: type2 at type2.com
> >> Subject: Re: [T2] why won't it start
> >>
> >> Bob wrote
> >> moved wire on coil that was on wrong terminal (thanks Jamie)
> >>
> >> Bob... I wrote you about 2 wrong wires on the coil........ which wire
did
> >> you move?
> >>
> >> ----- Original Message ----- From: "Jamie"
> >>> you can't feed the double relay from the NEG term on the coil.. and
you
> >>> can't put power from ignition that formerly went to fan to the NEG
> >>> term....
> >>
> >
> >
> > _______________________________________________
> > type2 mailing list
> > type2 at type2.com
> > https://www.type2.com/lists/type2/listinfo
>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo



More information about the type2 mailing list