[T2] why won't it start

[accessys at smart.net]

I checked several.  2 is so hard to get out and back in that I didn't 
check it.

Bob


On Tue, 9 Jun 2015, Pat Spragge/RFAN wrote:

> Date: Tue, 9 Jun 2015 19:22:55 -0700
> From: Pat Spragge/RFAN <Pat.Spragge at rfan.com>
> To: "accessys at smart.net" <accessys at smart.net>
> Cc: thewestyman <zolo at foxinternet.net>, "type2 at type2.com" <type2 at type2.com>
> Subject: Re: [T2] why won't it start
> 
>
> Bob,
> Don't want to beat a dead horse, but the when we ask if you have spark at
> all 4 plugs, you respond with I have spark. Did you check for a good spark
> at ALL 4 plugs?
>
> Sent from my iPad
>
>> On Jun 9, 2015, at 5:45 PM, accessys at smart.net wrote:
>>
>> 1 compression is all between 115-120psi forget which got which but all
>> good
>>
>> 2 I have fuel spraying
>>
>> 3 I have spark
>>
>> maybe old gas, engine spun bearing in Oct so is gas from then.
>>
>> thanks
>> Bob
>>
>>
>>
>>
>> On Tue, 9 Jun 2015, thewestyman wrote:
>>
>>> Date: Tue, 9 Jun 2015 17:29:58 -0700
>>> From: thewestyman <zolo at foxinternet.net>
>>> To: accessys at smart.net, Jamie <jrivers at globalserve.net>
>>> Cc: type2 at type2.com
>>> Subject: Re: [T2] why won't it start
>>>
>>> Bob,
>>>
>>> 1  What are the figures you got for each cylinder compression?
>>> 2  Did you check if you have fuel spraying on both sides?
>>> 3  Do you have spark at all the four cylinders?
>>>
>>> Now, if those are good, you are close.  If not, then which one you
> don't
>>> have?
>>> Zoltan
>>>
>>>
>>> -----Original Message----- From: accessys at smart.net
>>> Sent: Tuesday, June 09, 2015 4:07 PM
>>> To: Jamie
>>> Cc: type2 at type2.com
>>> Subject: Re: [T2] why won't it start
>>>
>>>
>>> actually moved em both.   both black wires but wrong terminals
>>>
>>> got FI working with that.
>>>
>>> thanks
>>> Bob
>>>
>>>
>>> On Tue, 9 Jun 2015, Jamie wrote:
>>>
>>>> Date: Tue, 9 Jun 2015 18:53:01 -0400
>>>> From: Jamie <jrivers at globalserve.net>
>>>> To: Jamie <jrivers at globalserve.net>, accessys at smart.net
>>>> Cc: type2 at type2.com
>>>> Subject: Re: [T2] why won't it start
>>>>
>>>> Bob wrote
>>>> moved wire on coil that was on wrong terminal (thanks Jamie)
>>>>
>>>> Bob... I wrote you about 2 wrong wires on the coil........ which wire
> did
>>>> you move?
>>>>
>>>> ----- Original Message ----- From: "Jamie"
>>>>> you can't feed the double relay from the NEG term on the coil.. and
> you
>>>>> can't put power from ignition that formerly went to fan to the NEG
>>>>> term....
>>>>
>>>
>>>
>>> _______________________________________________
>>> type2 mailing list
>>> type2 at type2.com
>>> https://www.type2.com/lists/type2/listinfo
>>
>>
>> _______________________________________________
>> type2 mailing list
>> type2 at type2.com
>> https://www.type2.com/lists/type2/listinfo
>