[T2] Power loss in 4th

[accessys at smart.net]

don't forget to remove gas filler cap before doing this

Bob

On Mon, 19 Oct 2015, Tim Shepherd wrote:

> Date: Mon, 19 Oct 2015 13:27:41 -0700
> From: Tim Shepherd <forever-endeavor at hotmail.com>
> To: Type 2 forum <type2 at type2.com>
> Subject: Re: [T2] Power loss in 4th
> 
> One thing you could try, short of pulling the tank or draining it, is to disconnect the fuel line from the pump and blow compressed air up the line into the tank. Just blowing through it with your mouth may be sufficient. I had an old split window Bus with this problem; the tank was super rusty inside and eventually the flakes of rust would block the output. Blowing up the fuel line into the tank would fix it for awhile.
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>