[T2] won't idle

[accessys at smart.net]

found bad throttle body I am pretty sure, and found a good one in the 
garage so will put that in first.

thanks
Bob

On Wed, 20 Apr 2016, Andrew Burczyk wrote:

> Date: Wed, 20 Apr 2016 20:34:29 -0600
> From: Andrew Burczyk <Andrew.burczyk at shaw.ca>
> To: accessys at smart.net, type2 at type2.com
> Subject: RE: [T2] won't idle
> 
> Try looking for a vacuum leak in the brake vacuum booster line.  Unhook the line at the intake manifold and plug the hose connection on the manifold so that no air leaks in.  See if you can get it to idle like this.  If so then the problem is in the vacuum booster line or the vacuum booster itself.  Mine had a rotten piece of hose between the steel booster line and the vacuum booster itself.  Rubber rotted inside the fabric covering on the factory hose and it just crumbled when I pulled it off.
>
> Andy
>
>
> -----Original Message-----
> From: type2 [mailto:type2-bounces at type2.com] On Behalf Of accessys at smart.net
> Sent: April-16-16 10:52 AM
> To: type2 at type2.com
> Subject: [T2] won't idle
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>
>
>