[T2] Electrical problems

[Richard Palmer]

do the tail lights work? That should help narrow it down...

On Mon, Jun 20, 2016 at 3:25 PM, Bob Pratt <ka1dza at verizon.net> wrote:

> Here is an updated list of things I've done to get my bus inspected. I've
> repeated things for those who have not seen this befor.
>
> The 4 way flashers only work in the front. I've replaced the bulbs in the
> rear. I've replaced the 4 way flasher switch. And I've cleaned each ground
> connection down to bright metal, cleaned the screws on a wire wheel, and
> applied "Noalox" on all of the electrical connections.
>
> 2. The brake lights don't work. Along with some the things I did in #1, I
> bled the master cylinder, and checked the continuity across the pressure
> switch. I get continuity. I've ordered new switches just in case.
>
> 3. The oil light on the dash won't work. I've replaced the pressure switch
> and light bulb on the dash. I don't know how to check the circuit. I know
> it's one wire from front to back.
>
> If anyone has a clue, or knows of anyone who had a clue that can help,
> I'll mention you in my will!!!
>
> I miss driving Myles and I'm envious of those I see driving their "babies"
> around the area.
>
> Thanks in advance for any help.
>
> Bob Pratt
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo