[T2] Electrical problems

[Bob Pratt]

Yup, the tail lights work. The indicator light on the flasher works too.

Bob Pratt

> On Jun 20, 2016, at 3:27 PM, Richard Palmer <richard at teamspatula.com> wrote:
> 
> do the tail lights work? That should help narrow it down...
> 
>> On Mon, Jun 20, 2016 at 3:25 PM, Bob Pratt <ka1dza at verizon.net> wrote:
>> Here is an updated list of things I've done to get my bus inspected. I've repeated things for those who have not seen this befor.
>> 
>> The 4 way flashers only work in the front. I've replaced the bulbs in the rear. I've replaced the 4 way flasher switch. And I've cleaned each ground connection down to bright metal, cleaned the screws on a wire wheel, and applied "Noalox" on all of the electrical connections.
>> 
>> 2. The brake lights don't work. Along with some the things I did in #1, I bled the master cylinder, and checked the continuity across the pressure switch. I get continuity. I've ordered new switches just in case.
>> 
>> 3. The oil light on the dash won't work. I've replaced the pressure switch and light bulb on the dash. I don't know how to check the circuit. I know it's one wire from front to back.
>> 
>> If anyone has a clue, or knows of anyone who had a clue that can help, I'll mention you in my will!!!
>> 
>> I miss driving Myles and I'm envious of those I see driving their "babies" around the area.
>> 
>> Thanks in advance for any help.
>> 
>> Bob Pratt
>> _______________________________________________
>> type2 mailing list
>> type2 at type2.com
>> https://www.type2.com/lists/type2/listinfo
>