[T2] Fuel filter and alternator

[Erik Burtis]

I put the fuel filter and shutoff right near the tank outlet using a
bracket attached to the frame.  This limits the run of fuel line that can
leak uncontrollably.

On Fri, Jul 27, 2018 at 6:17 PM, Bob Pratt <ka1dza at verizon.net> wrote:

> Hi all!
> I finally got the engine changed from generator to alternator!
> The problem I ran into was when I pulled the generator out, I noticed that
> there was only one thick spacer and two thin spacers behind the fan.
> When I installed the two thick spacers the way it's supposed to be, the
> fan bounded up tight against the back of the doghouse.
> I installed washers between the alternator mounting tin and the
> doghouse.everything is turning the way it's supposed to now. I used blue
> gasket material to seal the gap left over.
> Has anyone run into this problem?
> Also, does anyone have any thoughts about the placement of the fuel filter
> and a fuel shutoff valve. I'm thinking about putting them under the the bus
> up in the frame.
> Any suggestions?
> Thanks all.
>
> Bob
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo