[T2] Horn tab at base of steering column

[c.dreike]

Kevin,
Here is a link to what I think you need. Not cheap, but shows its available:

https://www.mcmaster.com/#standard-electrical-wire-terminals/=1d3o25u

Chris
64DD Kamper Kit


On 6/1/2018 5:27 PM, Kevin Guarnotta wrote:
> Hi Guys,
>
> I've been trying to get my truck back together, now that a lot of the body work is done. I'm putting the dash together, and just finished figuring out the wiring, or at least I think I have.
>
> Then I couldn't get the key to turn, even with some PB blaster sprayed in there. So I took the column apart, to take the pod apart, and after doing all that, I was able to eventually get the ignition to turn - with a bunch of lubricant. I probably need to get a new one. I'll put it on my list...
>
> Anyway - in the process, the little brass tab on the bottom of the column that the horn wire connects to broke off. Any suggestion on repairing that? I can just drill out the rivet and rivet a new piece on, but I'm not sure where to get something that would work well for a spade connector.
>
> Suggestions appreciated - this is for my '69 Singlecab.
>
> Thanks,
>
> -Kevin Guarnotta
> Jamaica Plain, MA
>
> '78 Westy
> '69 Singlecab
> '65 Ez-camper
>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo