[T2] Sunroof question

[c.dreike]

OK Al,
I've started taking some photos. Lots of abrasive fine dirt in my 
mechanisms. I have spent quite a bit of time cleaning. I still need to 
clean out the stainless guide tubes. Not sure yet how to do that. Maybe 
some stranded steel cable and an electric drill like we do for our type 
1 engine heat risers.

I have new cables from CIP1. Got them on sale on cyber Friday for half 
off! I also have new plastic covers and a new drive mechanism. I think I 
should get a new handle too as long as I'm into it. I am also having new 
plastic inserts made for the front guides. Hope to do more work next 
week. I'm on my driveway and rain is expected tonight and over the weekend.

Anyone know what the plastic piece is supposed to look like on the rear 
guides? Send me a photo if you can.

Here is the link to the youtube video:
https://www.youtube.com/watch?v=JGvvrb7zykQ

Do a search for sunroof on The Samba. Lots of good information there. 
Also I have a copy of Bentley for 68-79 buses that has some good sunroof 
assembly info.

Cheers,
Chris

On 1/11/2019 2:21 PM, Al Brase wrote:
> Please figure it out so I can ask you questions! I have a1967 bug with 
> metal sunroof and the mechanism is pretty much the same.(I took it 
> apart 20 years ago, but it was broken then! I should put together one 
> day soon.
> Al
>
> On Fri, Jan 11, 2019 at 3:36 PM c.dreike <c.dreike at verizon.net 
> <mailto:c.dreike at verizon.net>> wrote:
>
>     OK,
>     Found the answer. I looked again at the sunroof operation video on
>     Youtube from storeagirl. I need to install the cable assemblies
>     with the
>     lift mechanism! Doh!!
>
>     Chris
>
>     On 1/11/2019 1:34 PM, c.dreike wrote:
>     > Hi,
>     > I'm installing my sunroof into my 71. When fully closed the back
>     end
>     > is still about 3/8" low as if it didn't ride all the way up onto
>     the
>     > ramps to push it into the closed position. It does appear to be
>     on the
>     > top of the ramps.  Anyone know if there is supposed to be a plastic
>     > part on the ramps for easy sliding that would cause it push up the
>     > last little bit?
>     >
>     > Thanks,
>     > Chris
>     > _______________________________________________
>     > type2 mailing list
>     > type2 at type2.com <mailto:type2 at type2.com>
>     > https://www.type2.com/lists/type2/listinfo
>
>     _______________________________________________
>     type2 mailing list
>     type2 at type2.com <mailto:type2 at type2.com>
>     https://www.type2.com/lists/type2/listinfo
>