[T2] Type 4 parts recommendation

[my13jetta at gmail.com]

Hi,

If it's a Type IV motor, there is no gland nut. That is on a Type I motor. Type IV motors have five bolts that hold the flywheel or flex plate on.

Brad Spear
'71 Karmann Ghia
'72 Westfalia

-----Original Message-----
From: type2 <type2-bounces at type2.com> On Behalf Of Roger Lemberg
Sent: Monday, 30 November, 2020 19:51
To: type2 at type2.com
Subject: Re: [T2] Type 4 parts recommendation

Greetings

Check the gland nut bearing. It could allow the shaft to move around. On Phrogbus it eventually led to the transmission seal to leak and one of the clutch surfaces to break free.

And make sure you torque the gland nut properly.

Peace,
Phrogbus and its Phrog
Phroggie at ieee.org
(70 Sportsmobile conversion)	
Northridge CA
_______________________________________________
type2 mailing list
type2 at type2.com
https://www.type2.com/lists/type2/listinfo